JumboSPOT RTQ(READY TO QSO) Manual
The JUMBO-SPOT-RTQ is a completely self-contained digital hotspot supporting all four amateur digital communication modes. (DMR, D-Star, P-25 and System Fusion) All that's required for operation is a power source and WiFi based internet connection.
Designed specifically for use with the MMDVM open source software platform created by Jonathon Naylor (G4KLX). The Pi-Star digital voice dashboard software created by Andrew Taylor (MW0MWZ) is pre-installed and extremely easy set up right out of the box. Pi-Star's unique automated software update feature make it very easy to keep your JUMBO-SPOT-RTQ up to date with the most current software and features.
Jumbo Spot has a built-in OLED status display that indicates the active mode of operation as well as the call sign and talk group of the current user. The built-in UHF (430-450Mhz) programmable simplex radio allows easy access from your digital handheld or mobile radio.
The Built-in WiFi 802.11bgn network radio makes connecting with multiple wireless routers, cell phone hotspots or mobile routers easy and seamless. The JUMBO-SPOT-RTQ will select the nearest pre-programmed wireless network automatically.
come with ZERO W(with wifi)+jumbospot(UHF+VHFnot main band)+TF8g(pi-star)+ANT433mhz
Specifications
802.11 b/g/n wireless LAN
1GHz, single-core CPU
512MB RAM
Micro USB power
installed JumboSPOT UHF(430-440)+VHF(144-146)
(VHF is not the main band, performance reduction)RF extend board.
8G TF CARD Installed PI-STAR panel
support DMR,YSF,P25 mode to QSO with RF To internet
128*64 i2c OLED Display
Default installed pi-star to TF card, wifi TEST SSID is TZB,pass is 13902982913,you can change your router 's default SSID and pass it will auto connect.
or you can
visit http://www.pistar.uk/wifi_builder.php input your home ssid and psk ,then download the wpa_supplicant.conf inside with have your home ssid and psk,then save to TF card ,ROOT root directory example F:\ then power on it ,wait 2-3 minutes ,it will auto connect your home 's ssid,you can check your wifi router to see the pi-star host connected and it's ip.
also you can use your pc to ping pi-star ,if success,you can open http://pi-star or your pi-star's ip default login user is pi-star,
pass is raspberry,then login to SET your CALLSIN,ID,FREQ,and Modem,like the picture:
Display Type is :OLED then Apply Changes.
Below A,B and C is Important! Pls Check.
Select A and Click Apply Changes ,then Input B and Apply Changes
also your DMR radio must input the Talk Group and Freq ,then you can talk now.
More info
http://www.pistar.uk
http://www.pistar.uk/dmr_bm_talkgroups.php
if you have problem you can install the pi-star IMAGE file to TF card and try again :
http://www.pistar.uk/downloads/
OLED is Only Display While your WIFI connected,and Display Type OLED Selected in pistar
