2018年6月8日 星期五

HOW TO USE MMDVM HOST WIF Main BOARD:


HOW TO USE MMDVM HOST WIF Main BOARD:
1. Connect your MMDVM HS/MMDVM HS DUPLEX/MMDVM Modem Board

2. Connect RJ45 to your PC and J1 For USB Power Cable,J3 is OTG ,D1  LED may light up.
3. Wait 30s Open http://192.168.85.1

4. If you install usb cp210x driver you can see the DEBUG Message USE AccessPort Terminal Software and BAUD 9600 is MMDVM Status MESSAGE,BAUD 57600 is system MESSAGE

5. Login MMDVM Panel USING root and pass 17234222
6. First Connect your Home wifi to enable WAN Function Click Network-> Wireless
Click SCAN and Select your home SSID Click JOIN NETWORK,Click Replace wireless configuration (important)

WAP passphrase input your home password,Click SUBMIT
7. Click UNSAVED CHANGES:10 ,Click SAVE & APPLY

MMDVM Host Main Board Connected your home wifi now,your Computer also Connect internet Now! PC  ping www.google.com to check.
8. Click System->RADIO_DMR_P25 Global 

Change 
MMDVM.ini Callsign=Replace your callsign,Id=Replace your DMR id, if you USE Duplex board Set Duplex=1
If you USE nextion TFT LCD,Set Dispaly=Nextion (current Don’t Support OLED)
If you Set DUPLEX=1 ,SET
 RXFrequency=451500000
TXFrequency=461500000
about 10MHZ+-
Next is Important
[Modem]
RXOffset=550
TXOffset=550
If you want DMR Mode Off Just SET
[DMR]
Enable=0
If you want P25 Mode Off Just SET
[P25]
Enable=0

Set DMR Server  Change 47.100.76.205 to Near you Server IP Find BMhosts.txt in Pi-star  
[DMR Network]
Enable=1
Address=47.100.76.205


All Done,In Service Click Restart Service

Check Status in Accessport

when you see  Host Running Ready QSO

You Can see Live Serial DEBUG MESSAGE:(AccessPort.exe)
D: 2018-06-08 08:10:12.243 DMR Slot 2, raw RSSI: 63, reported RSSI: 0 dBm
D: 2018-06-08 08:10:12.304 DMR Slot 2, raw RSSI: 63, reported RSSI: 0 dBm
D: 2018-06-08 08:10:12.305 DMR Slot 2, audio sequence no. 0, errs: 1/141 (0.7%)
D: 2018-06-08 08:10:12.363 DMR Slot 2, audio sequence no. 1, errs: 6/141 (4.3%)
D: 2018-06-08 08:10:12.425 DMR Slot 2, audio sequence no. 2, errs: 2/141 (1.4%)
D: 2018-06-08 08:10:12.483 DMR Slot 2, audio sequence no. 3, errs: 1/141 (0.7%)
D: 2018-06-08 08:10:12.544 DMR Slot 2, audio sequence no. 4, errs: 4/141 (2.8%)
D: 2018-06-08 08:10:12.603 DMR Slot 2, audio sequence no. 5, errs: 1/141 (0.7%)

BER <5% so RF WORK Great

E: 2018-06-08 08:12:10.112 Error returned from sendto, err: 128
E: 2018-06-08 08:12:10.112 DMR, Socket has failed when writing data to the master, retrying connection
M: 2018-06-08 08:12:10.112 DMR, Opening DMR Network
D: 2018-06-08 08:12:20.170 DMR, Sending authorisation
D: 2018-06-08 08:12:20.213 DMR, Sending configuration
M: 2018-06-08 08:12:20.250 DMR, Logged into the master successfully



Cp210x Driver:
Serial Live MESSAGE Monitor AccessPort

2 則留言:

  1. How can we update the DMRIDs.dat file?
    The one from the image is outdated

    回覆刪除
  2. Thank you for all your support and work...
    I have massed mu config. file, I think...
    May I have default config file?
    Thank you
    Sonny Noh
    sonnynoh@hotmail.com

    回覆刪除