JumboSPOT Quick Start Setup List

1.Power your JumboSPOT wait 3-4 minutes
2.Connect JumboSPOT 's AutoAP wifi
3.Login and Set wifi Configure input your home ssid and pass
3.setting according List below

4.Set DMR Radio Channel and ID CC FREQ
5.Open Your need MODE P25/YSF/DSTAR/NXDN and set server

MMDVM Main Restore Default Update System File

if you click MMDVM mainboard restore
you need update system file or you can't find set Menu
first you must set wifi connect your home ssid

pi-star 3.4.16 mmdmv.ini file

[General]
Callsign=BGXXX
Id=4600555
Timeout=240
Duplex=0
RFModeHang=300
NetModeHang=300
Display=OLED
Daemon=1

[Info]
RXFrequency=439600000
TXFrequency=439600000
Power=1
Latitude=50.00
Longitude=-3.00
Height=0
Location="Town, L0C4T0R"
Description="Country"
URL=http://www.mw0mwz.co.uk/pi-star/

[Log]
DisplayLevel=0
FileLevel=2
FilePath=/var/log/pi-star
FileRoot=MMDVM

[CW Id]
Enable=0
Time=10

[DMR Id Lookup]
File=/usr/local/etc/DMRIds.dat
Time=24

[NXDN Id Lookup]
File=/usr/local/etc/NXDN.csv
Time=24

[Modem]
Port=/dev/ttyAMA0
TXInvert=1
RXInvert=0
PTTInvert=0
TXDelay=100
RXOffset=550
TXOffset=550
DMRDelay=0
RXLevel=50
TXLevel=50
RXDCOffset=0
TXDCOffset=0
RFLevel=100
CWIdTXLevel=50
D-StarTXLevel=50
DMRTXLevel=50
YSFTXLevel=50
P25TXLevel=50
NXDNTXLevel=50
POCSAGTXLevel=50
RSSIMappingFile=/usr/local/etc/RSSI.dat
Trace=0
Debug=0

[Transparent Data]
Enable=0
RemoteAddress=127.0.0.1
RemotePort=40094
LocalPort=40095

[UMP]
Enable=0
Port=/dev/ttyACM1

[D-Star]
Enable=1
Module=B
SelfOnly=1
AckReply=1
AckTime=750
ErrorReply=1
RemoteGateway=0
ModeHang=20

[DMR]
Enable=0
Beacons=0
BeaconInterval=60
BeaconDuration=3
ColorCode=1
SelfOnly=1
EmbeddedLCOnly=0
DumpTAData=1
CallHang=3
TXHang=4
ModeHang=20

[System Fusion]
Enable=1
LowDeviation=0
SelfOnly=1
TXHang=4
RemoteGateway=0
ModeHang=20

[P25]
Enable=0
NAC=293
SelfOnly=1
OverrideUIDCheck=0
RemoteGateway=0
ModeHang=20

[NXDN]
Enable=0
RAN=1
RemoteGateway=0
SelfOnly=1
ModeHang=20

[POCSAG]
Enable=0
Frequency=439987500

[D-Star Network]
Enable=1
GatewayAddress=127.0.0.1
GatewayPort=20010
LocalPort=20011
Debug=0
ModeHang=20

[DMR Network]
Enable=0
Address=87.117.229.173
Port=62031
Local=62032
Jitter=360
Password=passw1rd
Slot1=0
Slot2=1
Debug=0
ModeHang=20

[System Fusion Network]
Enable=1
LocalAddress=127.0.0.1
LocalPort=3200
GatewayAddress=127.0.0.1
GatewayPort=4200
Debug=0
ModeHang=20

[P25 Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=42020
LocalPort=32010
Debug=0
ModeHang=20

[NXDN Network]
Enable=0
LocalAddress=127.0.0.1
LocalPort=14021
GatewayAddress=127.0.0.1
GatewayPort=14020
Debug=0
ModeHang=20

[POCSAG Network]
Enable=0
LocalAddress=127.0.0.1
LocalPort=3800
GatewayAddress=127.0.0.1
GatewayPort=4800
ModeHang=5
Debug=0

[TFT Serial]
Port=/dev/ttyAMA0
Brightness=50

[HD44780]
Rows=2
Columns=16
Pins=11,10,0,1,2,3
I2CAddress=0x20
PWM=0
PWMPin=21
PWMBright=100
PWMDim=16
DisplayClock=1
UTC=0

[Nextion]
Port=/dev/ttyAMA0
Brightness=50
DisplayClock=1
UTC=0
ScreenLayout=0
IdleBrightness=20

[OLED]
Type=3
Brightness=0
Invert=0
Scroll=0

[LCDproc]
Address=localhost
Port=13666
DimOnIdle=0
DisplayClock=1
UTC=0

What is Auto AP and how do I use it? only support 3.4.16 and newer

Auto AP mode is designed to provide a setup wifi for you to connect to, if your Pi-Star device is not already on a network.

If Pi-Star does not detect a known wifi network within approximately the first 2 minutes of booting up, it will create its own wifi called Pistar-Setup. 

Using your computer/phone, you can then connect to the Pistar-Setup wifi. The password for this network is: raspberry

Once you have connected to the Pistar-Setup wifi, you will be able to pull up the dashboard. Make your wifi configuration changes. Save them, and reboot Pi-Star. It will not access the new network until you reboot.

how to update rtq hs hostpot duplex firmware from pi-star ssh

for RTQ STM32_DVM HS
sudo pistar-mmdvmhshatflash hs_hat

for DUPLEX_HS
sudo pistar-mmdvmhshatflash hs_dual_hat